Sunamp Thermino 210 hp-SG

Thermino hp-SG (UniQ HW + iLTHP) - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.

How is it charged?

An external hot water source such as a boiler or Samsung heat pump with a grid electricity backup via a 2.8kW immersion element.

What size of house should it be used in?

The Thermino 210 hp-SG (UniQ HW 9 +iLTHP-SG) would typically be installed in a 3 bedroom property as a rule of thumb.

How much energy does it store?

The Thermino hp-SG can store around 10.5kWh, or approximately the equivalent of a 212L hot water cylinder.

Note: This unit weighs 185 kg and tilting beyond 45 degrees may damage the unit so keep this in mind when finding a site for it.